Guides

The 2-Minute Pre-Ride Safety Check

By the Bike Buddy crew5 min read

Most bike problems give you a warning before they become a real issue. A quick check before you ride is the easiest way to catch them. It takes about two minutes, needs almost no tools, and soon becomes a habit.

Why bother with a pre-ride check?

Bikes change between rides, even when they're just standing still. Tyres lose air, bolts can work loose, and a knock in a car park or building storage room can bend something without you noticing. In Dubai, heat, sun and dust speed all of this up. A short routine before you set off means you find the problem in the lobby, not halfway along a busy road.

Many riders use a simple memory aid: A, B, C, for Air, Brakes and Chain. We add a few extra steps that are worth the time.

Step 1: Air (tyres and wheels)

  • Squeeze both tyres. If one feels noticeably softer than usual, check it with a pump gauge before riding.
  • Look at the tread and sidewalls. You're looking for cuts, bulges, cracks or anything stuck in the rubber, such as glass, thorns or sharp stones.
  • Spin each wheel. Lift the front, then the back, and give each wheel a spin. It should run straight without rubbing on the brakes or frame.

Pressure is the most important part. Follow the range printed on your tyre's sidewall, and remember that heat makes the pressure rise. Our tyre pressure guide explains how to check it properly.

Step 2: Brakes

  • Squeeze each lever firmly. It should stop well before it touches the handlebar and feel firm, not spongy.
  • Do a rolling test. Push the bike forward and apply the front brake. The front wheel should lock or stop firmly. Repeat with the rear brake.
  • Glance at the pads. On rim brakes, check the pads sit squarely on the rim and still have wear grooves. On disc brakes, look for obvious oil or dirt on the rotor.

If anything feels different from last time, don't ignore it. Our article on 7 signs your bike brakes need servicing explains what different symptoms mean.

Rule of thumb: if you're unsure about your brakes, don't ride. Every other item on this list can be a nuisance; brakes are the one that really matters.

Step 3: Chain and gears

  • Look at the chain. It should look lightly lubricated, not dry and orange, and not caked in black, gritty paste.
  • Turn the pedals backwards. The chain should run smoothly through the rear derailleur without jumping or kinking.
  • Shift through a few gears as you set off. If the chain clicks, hesitates or jumps, see why your gears skip.

Step 4: Quick releases, axles and bolts

  • Check both wheels are secure. Quick-release levers should be fully closed and firm, and thru-axles should be tight.
  • Check the handlebar. Stand in front of the bike, grip the front wheel between your knees, and try to twist the bars. They shouldn't move.
  • Check the headset. Hold the front brake and rock the bike forwards and backwards. A knocking feeling suggests a loose headset.
  • Check the seat. Try to twist the saddle. It shouldn't move, and the seat post clamp should be tight.
  • Check the cranks. Grab both pedals and push them sideways towards the frame. There should be no play or clunk.

Step 5: Lights, bell and kit

  • Test your lights, front and rear, and make sure they're charged. Even on a daytime ride, plans can change and you may end up riding after sunset.
  • Check your bell if you have one, especially if you'll be on shared paths.
  • Check your helmet. The straps should be adjusted so it sits level and snug, and the shell should be free of cracks.
  • Check the current RTA rules for what equipment you need where you'll be riding, as these can change.

Extra checks for e-bikes

E-bikes need everything above, plus a few more seconds:

  • Make sure the battery is charged and properly locked into its mount.
  • Switch on the display and check it powers up normally without error messages.
  • Check that the motor assistance cuts out when you pull the brake levers, if your bike is designed to do this.

If you see an error code or the motor behaves strangely, don't try to open the battery or electronics yourself. Describe the problem to us and we can advise on next steps.

Dubai-specific habits

  • Heat: if your bike has been sitting in a hot car park or on a sunny balcony, check tyre pressure again just before you ride.
  • Sand and dust: after a desert or beach ride, wipe down the chain and brake surfaces so grit doesn't sit there until next time.
  • Humidity: near the coast, keep an eye out for rust on the chain, bolts and cables.
  • Routes: if you're heading somewhere new, check access and conditions before you go, as paths can close or change.

When the check finds a problem

The point of a pre-ride check is to find things early. If you find a soft tyre, top it up. If you find something you can't fix, such as spongy brakes, a wobbling wheel or gears that won't stay in place, it's time for a service.

Our mechanics come to your home, building or office anywhere in Dubai. Our Basic package at 150 AED covers cleaning, brake and gear servicing, and tyre inspection with pressure adjustment. For a more thorough look, the Premium package at 250 AED includes a complete bike inspection. Book a visit here.

Let us handle it

Our mechanics come to your home anywhere in Dubai. Bike packages from 150 AED. Book in 60 seconds on WhatsApp.

Book a service