Your motorcycle brakes need servicing if the lever or pedal feels spongy, the brakes squeal or grind, the pads are worn to their indicators, you feel pulsing when you brake, or the fluid is dark, low or leaking. If the brakes fail or you see fluid leaking, stop riding and get help.
Spongy lever or pedal
A healthy hydraulic brake feels firm and bites at a consistent point. If the lever comes closer to the grip than it used to, or the pedal sinks further, something has changed. Common causes include air in the system, old fluid that has absorbed moisture, low fluid from worn pads or a leak, and master cylinder problems. A lever that firms up after a few quick squeezes is a strong sign of air in the lines. Don't ride on a spongy brake; get it checked.
Squealing or grinding
Squealing can come from glazed pads, dust build-up, loose pad hardware or contamination from oil, chain lube or cleaning sprays. It may start as an annoyance, but contaminated pads lose grip and usually need replacing.
Grinding or a metallic scrape is more serious. It usually means the friction material has worn away and the metal backing plate is cutting into the disc. Stop riding: carrying on damages the disc and greatly reduces braking.
Pad thickness and wear indicators
You can usually see the pads by shining a torch into the caliper from behind or above. Many pads have a groove cut into the friction material, and when the groove has worn away, the pad is due for replacement. Your manual gives the minimum thickness. Check both pads in each caliper, since they don't always wear evenly, and remember the front and rear pads often wear at different rates.
Dust and sand between the pads and discs speed up wear, so check more often if you ride on dusty roads around Dubai.
When you check the pads, look at the brake fluid reservoir too. The level drops slowly as pads wear, so a falling level with plenty of pad left points to a leak.
Vibration or pulsing
A pulsing lever, or a shudder through the bars when you brake, often comes from a disc with uneven thickness or pad deposits, usually described as a warped disc. Repeated hard braking and the heat it creates can contribute. Similar symptoms can also come from loose disc bolts or worn wheel or steering-head bearings, so it's worth having the whole front end checked.
Pulling to one side
A bike that pulls or weaves under braking may have a sticking caliper piston, unevenly worn pads or a dragging brake. With the bike on a stand and the engine off, a wheel that's hard to turn by hand suggests a brake is dragging. Low tyre pressure and uneven tyre wear can also cause pulling, so check those too.
Brake fluid colour, level and age
Most motorcycle hydraulic brakes use DOT brake fluid, which absorbs moisture from the air over time. Moisture lowers the fluid's boiling point, so the brakes can fade or go soft after hard use, and it can corrode internal parts. Dubai's coastal humidity doesn't help.
- Colour: fresh fluid is usually clear to light amber. Dark brown fluid is old.
- Level: check it against the marks on the reservoir, with the reservoir level.
- Age: your manual sets a replacement interval by time as well as distance. Only ever use the DOT type marked on the reservoir cap.
Brake fluid damages paint and plastics, so don't open the reservoir unless you know what you're doing.
Leaks
Look for wet patches or crusty residue around the master cylinders, hose joints, banjo bolts and calipers, and for fluid on the disc, wheel or tyre. Any brake fluid leak means the system can't be trusted. Stop riding, don't simply top it up and carry on, and get the bike inspected.
ABS warning light
On bikes with ABS, the warning light normally comes on at start-up and goes out once you move off, as your manual describes. If it stays on or lights up while riding, the ABS may not be working. On most bikes ordinary braking still works, but without anti-lock protection. Causes range from a dirty wheel-speed sensor to wiring faults or low battery voltage. Ride gently, allow more stopping distance and get it checked.
Bicycle or motorcycle?
If you also ride a pedal bike, many of the warning signs are similar, but the parts and fluids differ. Our guide to signs your brakes need service covers bicycles.
When to book a brake service
Brakes are checked in every Bike Buddy motorcycle package, from Essential upwards. Brake pad replacement is a standalone repair that we quote once we know your make, model and year, and nothing is fitted until you approve. Our guide to how often to service a motorcycle in Dubai shows how brake checks fit into a regular routine.
Our mechanics come to your home, building car park or office. See our motorcycle repair and service page or book on WhatsApp. If the brakes have failed or are leaking, don't ride the bike anywhere; we'll come to where it's parked.
Book a motorcycle service
Packages from 250 AED at your door, with parts quoted first. Book in 60 seconds on WhatsApp.